dd wrt v24 sp2 how to increase antenna power

Initially I tried to connect directlyįrom a 20mW wireless card in the remote PC with a high gain (16dB) antenna, to my zyxel ADSL router.Ĭommunications were very sporadic at best, so I arrived at the solution below using 2 WRT54GL wireless routers in the attics of both houses. You will need to set up this feature if you are running a service (e.g., a web server) on an internal machine to make it accessible outside your local network.I needed to share my broadband DSL internet connection with a nearby house as depicted below. To finish the setup, please click ' Save' and then ' Apply Settings'. Note: If you would like to update multiple host names, use an ‘-a’ argument to separate them in the Hostname field. Please don't forget that the ' Username' field should be filled in with your actual domain name, ' Password' - your Dynamic DNS password ' Path' - ' ' should be replaced with the domain, ' DynamicDNSPassword' - with your Dynamic DNS password.

Hostname: Your subdomain ( for, etc.).

Password: Dynamic DNS password for your domain ( Domain List > click on the Manage button next to the domain > the Advanced DNS tab > Dynamic DNS).

Username: - replace it with your domain name.

Path: /update?domain=&password=DynamicDNSPassword&host=.

DYNDNS Server: - the name of the server should not be changed.You will need to fill out the following fields: Log in to your router’s web interface and go to Setup > DDNS.

Because the IP address will be automatically updated by your router, it does not matter what IP address you specify when creating the record. Create an A+Dynamic DNS record with any IP address for the host name you would like to be updated. Make sure Dynamic DNS is enabled for your domain.Ģ. How to configure a DD-WRT router If you are using a router with DD-WRT firmware, you can make use of the built-in DDNS option to have A records for your domain automatically updated.

Dd wrt v24 sp2 how to increase antenna power